September 23, 2022 By Ocala Car Audio

Product Spotlight: Sony XM-1ES Mono Subwoofer Amplifier

If you’re shopping for a premium amplifier for your car audio subwoofer system, drop by Ocala Car Audio and ask about the new Sony XM-1ES. As part of the premium Mobile ES series, the XM-1ES is designed to deliver up to 1,000 watts of power, with impressive sound quality and all the features we’ll need to integrate the amp into your vehicle. Let’s check it out!

Sony XM-1ES Subwoofer Amplifier Features

The XM-1ES is rated to produce up to 600 watts of power into a 4-ohm load and an impressive 1,000 watts when connected to a 2-ohm load. The amplifier uses state-of-the-art Class D circuitry to deliver this power efficiently and reliably without creating a lot of heat from wasted energy. The frequency response is 10 Hz to 500 Hz, and the signal-to-noise ratio is good and low at 77 dB. All of the specifications Sony provides are compliant with the CTA-2006-C standards, so you know the numbers are believable and comparable to other brands using the same guidelines.

The RCA jacks will accept up to 8 volts of signal in the low-voltage mode and an impressive 16 volts in the high-voltage mode to make it compatible with most factory source units. The amp has an adjustable low-pass crossover with a steep 24 dB/octave slope. There’s also an infrasonic filter that’s adjustable between 5 and 50 hertz. Sony includes a great-looking remote level control that we can install in the front of your vehicle to make it easy to fine-tune the bass level to whatever music you are enjoying or your mood.

Internally, the amp uses premium quality components, including low-ESR capacitors and shielded inductors on the speaker outputs. Sony took extra care with the chassis design to ensure that the amp will continue playing even on the hottest days by including a cooling fan in the back corner. The chassis also features a resonance-damped design to prevent unwanted vibrations from affecting the audio circuitry.

Ocala’s Best Car Audio Upgrades

If you’re looking for a great amplifier to power the subwoofers in your car, truck or SUV, drop by Ocala Car Audio and ask about the Sony XM-1ES mono subwoofer amplifier. We can help you choose premium subwoofers and the perfect enclosure to go with them. We’d be happy to provide you with a quote to integrate the entire system into your vehicle to ensure it will sound fantastic. If you have any questions and can’t get to our store during regular business hours, feel free to give us a call or use our contact page to send our team an email.

September 20, 2022 By Ocala Car Audio

Product Spotlight: Sony XAV-AX4000 Multimedia Receiver

Need help wading through the hundreds of car radio upgrade options? Drop by Ocala Car Audio and ask about the Sony XAV-AX4000 multimedia receiver. This radio features wireless Android Auto and Apple CarPlay, an impressive 6.95-inch capacitive touch display and premium Bluetooth audio streaming. It also features one of the most intuitive interfaces on the market, so it’s easy to use!

Sony XAV-AX4000 Audio Source Technologies

The XAV-AX4000 includes an AM/FM receiver with station information display. You can connect a USB memory stick to the rear USB-C port to play MP3, WMA, AAC, WAV, FLAC, ALAC, DSF or DSDIFF audio files. The port will provide up to 3 amps of current to charge your smartphone in record time. The built-in Bluetooth radio allows for hands-free calling and can stream audio from your phone. If you have a newer Android-based smartphone, LDAC support provides near CD-quality sound wirelessly. We can also upgrade the radio with a SiriusXM satellite radio receiver.

Wireless Apple CarPlay and Android Auto connectivity allow you to use the digital assistant on your smartphone to choose from dozens of streaming options like Spotify, Pandora, iHeartRadio, Tidal or Audible. You can also place phone calls by number or let the system search the internet based on a business name and location. You can have the system read incoming text messages, and you can even dictate a response, all while keeping your eyes on the road. Of course, navigation information to almost any location in North America is available by simply asking.

Connectivity and Upgrade Options

The XAV-AX4000 has a built-in 20-watts-per-channel amp to power your speakers, or we can use the 2-volt preamp outputs to connect aftermarket high-power amps to bring your speakers to life. The radio includes a 14-band graphic equalizer, electronic crossovers and signal delay settings that allow us to optimize the speakers’ sound in your car or truck.

Compatibility with your steering wheel buttons and support for the Maestro RR radio integration module let this Sony radio work with the existing controls or technology in your vehicle. A backup camera input with both manual and automatic triggering will help you see what’s behind your vehicle when parking or maneuvering.

Experience the Sony XAV-AX4000 At Ocala Car Audio Today

Having all the features you want in a new radio is important. What matters more is how easy the radio is to use. Drop by Ocala Car Audio and take the Sony XAV-AX4000 for a test drive on one of our displays. We think you’ll agree that it has an incredibly intuitive interface and responds instantly to every command. If you can’t get to our store during regular business hours but have questions about this radio or any of our products, give our team a call or send us an email using our contact form. We’d be happy to assist!

September 16, 2022 By Ocala Car Audio

Product Spotlight: Sony XM-5ES Five-Channel Car Audio Amplifier

The Sony XM-5ES five-channel car audio amplifier from Ocala Car Audio is an excellent solution to power your entire car audio system. With up to 165 watts of power available to the main channels and a hefty 750 watts for a subwoofer, there’s no concern that this amp won’t be loud enough to recreate your favorite concert experience on your next drive.

Features of the Sony XM-5ES Car Audio Amplifier

The XM-5ES is based on a cast aluminum heatsink that measures just under 15 by 8.5 inches and stands 2.36 inches tall. All the signal, power and speaker connections are along the front edge to make it easy for us to install. The four main amp channels are rated to deliver 100 watts of power into 4-ohm speakers and 165 watts into 2-ohm drivers. The subwoofer channel can produce up to 450 watts into a 4-ohm sub and 750 watts into a 2-ohm driver. We can bridge the front channels to provide 330 watts into a pair of 4-ohm drivers if you need a high-power three-channel amp. Sony included a cooling fan to ensure that the amp will continue playing on even the hottest Florida days.

The amp includes high-, low and even bandpass crossovers on the main channels and an adjustable low-pass filter in the subwoofer channel. We can use the infrasonic filter to protect subs in ported boxes from excursion issues at low frequencies. Sony included remote turn-on detection circuitry in the amp so it will turn on automatically when installed with a factory source unit. Likewise, the amp includes a high-level input switch so that we can connect a factory-installed radio to the amp without the need for an interface. A remote bass level control is included with the amp to let you fine-tune the sub’s output to suit your music or listening preferences.

High-Resolution Audio Support

If you’re fanatical about sound quality, you’ll be happy to hear that the Sony XM-5ES offers frequency response that extends to 40 kHz to ensure that your favorite high-resolution music is reproduced with clarity and detail. The amp has a distortion rating of 0.05%, and the signal-to-noise ratio is specified as -77 dBA.

Upgrade Your Car Stereo at Ocala Car Audio Today!

If you need a great amp to power the front and rear speakers and subwoofer in your car, truck or SUV, drop into Ocala Car Audio and ask about the Sony XM-5ES five-channel car audio amplifier. Our team of expert installation technicians is available to integrate the amp into your vehicle and configure everything so it will play loudly and sound amazing! If you can’t visit our store during regular business hours, feel free to give us a call or use our contact page to send our team an email.

September 13, 2022 By Ocala Car Audio

Product Spotlight: Sony XAV-AX6000 Multimedia Receiver

If you’re shopping for a car radio that has all the features you want and looks great in your dash, drop by Ocala Car Audio and ask about the Sony XAV-AX6000. This digital multimedia receiver features a 6.95-inch display, built-in wireless Apple CarPlay and Android Auto and supports high-resolution LDAC Bluetooth audio streaming. Intrigued? Let’s take a closer look.

Features of the Sony XAV-AX6000

The Sony XAV-AX6000 is based on a 6.95-inch capacitive-touch display with an anti-glare coating and a bezel-less design that looks right at home in the dash. Buttons for volume and track control, a home button to take you back to the main menu and a voice button to activate your smartphone’s voice recognition features are located just below the display.

The radio includes a high-performance AM/FM tuner with station information display. A USB port allows you to play MP3, WMA, AAC, WAV, FLAC, ALAC, DSF and DSDIFF digital audio files. The USB port can also be used to charge your smartphone. A Bluetooth transceiver that supports LDAC allows for high-resolution audio streaming performance from an Android smartphone. An HDMI port is available to let you connect your smartphone, a media player or a laptop to watch a video through the system when the vehicle is parked.

Smartphone Connectivity

Wireless Android Auto and Apple CarPlay connectivity let you maximize the voice recognition capabilities of your smartphone’s digital assistant to make phone calls and dictate text messages. You can request turn-by-turn navigation instructions to almost any address or business in North America using Google Maps, Waze or Apple Maps. Of course, you can stream from dozens of entertainment options, including Pandora, iHeartRadio, Spotify, Tidal and Audible.

System Connectivity Options

The XAV-AX6000 can drive four speakers with its built-in amplifier, or we can use the 5-volt preamp outputs to add external amplifiers to bring your system to life. The radio has digital signal processing features, including signal delay options for each output, a 14-band graphic equalizer, and high- or low-pass crossovers. We can add an interface to let you use the radio buttons on your car’s steering wheel or go all-out with a Maestro Integration module to allow the radio to communicate with the computers in your vehicle to display engine information and, in some applications, control the heating and air conditioning and even heated seats in your vehicle. The Sony radio also has a backup camera input to help you park safely.

Experience the Sony XAV-AX6000 at Ocala Car Audio Today!

While the features of the XAV-AX6000 are essential, its ease of use, responsiveness and clean styling truly set it apart from the competitors. Drop by Ocala Car Audio today and ask for a demonstration. If you have questions and can’t get to our store, give us a call or use our contact form to send our team an email.

July 19, 2022 By Ocala Car Audio

Product Spotlight: Soundstream Reserve HDHU.14+ Harley Radio

If you want an impressive radio upgrade for your 2014 or newer Harley-Davidson touring motorcycle, drop by Ocala Car Audio and ask about the Soundstream Reserve HDHU.14+. This multimedia receiver is a direct drop-in replacement for the Boom! Box radio and adds Apple CarPlay and Android Auto smartphone connectivity and much more to make your riding time more enjoyable.

Features of the Soundstream Reserve HDHU.14+

The folks at Soundstream created the HDHU.14+ to make upgrading the sound system on your Harley-Davidson touring bike easy and reliable. This new radio bolts directly to the fairing and plugs right into the factory wiring, including the original equipment antenna and USB plug connections. We can add the optional HDHU.14CM interface to allow the stereo system controls on the handlebars to work with the new radio.

The HDHU.14+ is based around an optically bonded 7-inch touchscreen integrated into an IPX5-rated water-resistant front panel. The bright display can show maps from Google, Waze or Apple Maps from CarPlay and Android Auto. You can connect a USB memory stick as large as 64 GB to play MP3, WMA, AAC or FLAC audio files. Bluetooth audio streaming is also included, so listening to Spotify, Pandora, iHeartRadio or Amazon Music from your smartphone is easy.

Improved Audio System Performance

Using the factory-installed Boom! Box radio, with its radical built-in equalization curves, can result in unpredictable performance when fed to high-power amplifiers. The Soundstream Reserve HDHU.14+ has dedicated front, rear and subwoofer preamp outputs that produce 4 volts. This clean signal will make your speakers sound the very best they can.

If you aren’t using new amplifiers, the HDHU.14+ is equipped with a larger-than-normal 50-watt-per-channel amplifier that’s 2-ohm stable. This radio will sound much better than the stock Harley-Davidson solution.

For the ultimate fine-tuning, the HDHU.14+ includes a 10-band graphic equalizer that we can use to calibrate the sound system for your listening preferences.

Ocala Car Audio Offers the Best Motorcycle Audio System Upgrades

The HDHU.14+ is a direct bolt-in solution for 2014 and newer Street Glide, Electra Glide and Electra Glide Ultra Classic and 2015 and newer Road Glide and Road Glide Ultra motorcycles. Our team of motorcycle upgrade experts is available to complete the integration for you so you can get back out on the road and enjoy some wind therapy. Drop by Ocala Car Audio and ask for a demonstration of the Soundstream HDHU.14+ today. You can also reach us by phone or email using our contact form for more information.

April 28, 2021 By Ocala Car Audio

This Amazing Jeep Wrangler got Audio and Customization

Jeep Wrangler sitting in front of Ocala Car Audio — This 2020 Jeep Wrangler came in for a stereo and leather upgrade

The owner of this 2020 Jeep Wrangler contacted Ocala Car Audio to enlist our assistance in finishing this customization project. He had purchased this Jeep for his daughter and wanted us to coordinate several upgrades to match his vision. This Jeep Wrangler started life in Las Vegas with a 392-cubic inch V8 that can crank out a mind-bending 470 horsepower and 470 pound-feet of torque. The vehicle already had a lift kit and 37-inch tires. He wanted us to upgrade the interior, install a premium entertainment system and have the vehicle painted. After reviewing the project, we agreed to coordinate its completion with the help of several local shops.

Jeep Wrangler Entertainment System Upgrade

We started with what we do best: an audio system upgrade. The heart of the new stereo is a Stinger UN1810 multimedia receiver that’s known as the Heigh10. This radio features a massive 10-inch display and includes both Apple CarPlay and Android Auto smartphone connectivity. We upgraded the radio with an SXV300v1 SiriusXM satellite radio receiver so she’d be able to listen to any genre of music she wanted.

Our technicians used Stinger’s SRK-JW18EH installation kit to integrate the radio into the dash and allow it to communicate with the data network in the vehicle. Not only do the volume buttons on the steering wheel work with the Heigh10, but the radio can display engine and drivetrain information on the screen.

The new radio feeds a five-channel JL Audio VX1000/5i amplifier that we mounted under the driver’s seat using JL’s SBA-J-JLU-UAR bracket. This amp is rated to produce 75 watts of power from the four main channels and 600 watts from the subwoofer channel. More importantly, it includes a powerful digital signal processor that we used to configure the speaker’s crossovers, output levels and equalization settings. A four-AWG JL Audio XD-PCS4-1B power kit feeds the amp, and we added a JL Audio DRC-205 remote level control to make it easy to adjust the subwoofer output level from the front seat.

Jeep Wrangler Speaker Choices

For speakers, we installed two sets of JL Audio C3-650 6.5-inch components. The front set replaces the woofers in the bottom of the dash and the small midrange speakers near the windshield. The second set is mounted in the overhead soundbar just behind the driver and passenger seats.

Delivering solid bass performance was important to the upgrade, so we removed the stock subwoofer from the vehicle and purchased new trim panels so that we could install a set of JL Audio Stealthbox enclosures. The SB-J-JL4DPAS/10TW1-4 and SB-J-JL4DDRV/10TW1-4 enclosures feature 10TW1-4 10-inch subwoofers in fiberglass pods that are optimized for the area above the rear wheel well.

Remote Starter and Accessory Upgrades

With all the customization planned for the vehicle, the owner wanted it to be protected. We installed a Compustar remote car starter with its Alarm-It security upgrade. The security options include shock, tilt and motion sensors along with a high-output siren. The client chose one of the classic Compustar 901 two-way LCD remotes and the DroneMobile smartphone interface to control the alarm and starter. DroneMobile uses cellular communication to relay commands from the smartphone to the vehicle and provides alerts instantly if someone is tampering with it.

Accessories and Lighting

Next, we added a few functional and styling upgrades to the vehicle. We installed a set of XK Glow LED wheel rings along with a Pro-Series under-car kit and their Jeep-specific third brake light system. All the accent lighting can be controlled by a smartphone application to choose a color or change the pattern when the Jeep is parked.

We installed a Warn full-width crawler bumper and mounted a VR Evo 12-S 12000-pound winch to it. This winch includes 90 feet of 3/8-inch synthetic cable. We added a set of 3.5-inch Heise HE-DL2 LED driving lights to the bumper to help her see once the sun sets.

Working With Local Partners

We had our friends at Titan Up Automotive Services install an Alea Leather kit on the front and rear seats. The kit also includes new leather trim pieces that fit around the transfer case and gear selector.

Our client felt that the Jeep Wrangler was a little to tall. To help accommodate them we worked with a couple of local partners. Ocala Tire Service helped by installing smaller 35″ tires. After the tires were changed, we took the Jeep to Groeb Motorsports to help lower the suspension.

The icing on the cake for the project was a trip to see Claudio and Paintworx for a custom paint job. The Jeep came to use in a rather bland gray. The client wanted something vibrant and exciting and chose a custom metallic yellow hue that made this vehicle absolutely POP!

Ocala’s Vehicle Customization Experts

Working with our vehicle customization partners in the area, we upgraded this Jeep into something classy and unique for our client. He was very happy with the results and impressed with our ability to manage the project. We’re sure his daughter is going to love her new Jeep Wrangler. If you’re interested in upgrading your Jeep, drop by Ocala Car Audio and speak with one of our Product Specialists. You can also reach us by phone or e-mail using our contact page.

April 21, 2021 By Ocala Car Audio

Harley stereo upgrade on this 2015 Harley Street Glide

Street Glide Sound Harley Stereo Upgrade — 2015 Harley Street Gide came in for a Diamond Audio stereo upgrade. When it was done, this thing was LOUD AND CLEAR.

A local client recently brought his 2015 Harley-Davidson Street Glide to Ocala Car Audio for a sound system upgrade. He’d purchased audio upgrades for the bike from us a few years ago and installed them with the help of a friend. He decided that it wanted the system to sound better and play louder, so he brought the cool cruiser to us and explained his goals. After taking a look at his bike and talking about a few options, we put together a simple yet elegant solution that would meet his expectations.

Harley-Davidson Sound System Upgrade

Street Glide Sound — Rockford Fosgate’s DSP allowed us to retain the Harley factory radio.

Harley Stereo upgrade on this 2015 Street Glide — The horn loaded tweeters project sound even over the ambient noise of the road.

We started this Harley stereo upgrade by removing the front fairing and the stock plastic speaker enclosure. We planned to install a set of Diamond Audio MP654 Pro-Series 6.5-inch coaxial horn-loaded speakers. Unlike conventional speakers, these drivers use an oversized horn-loaded tweeter and feature a massive 1.5-inch voice coil on the midrange driver. Even though they look gigantic, they fit into the stock speaker locations in the front fairing quite nicely.

As with any upgrade, choosing an amplifier that can deliver adequate power is crucial to getting great sound. We installed a Diamond Audio Micro84U amplifier on top of the radio inside the fairing. This amp is rated for 165 watts per channel, but it’s wired in what’s called bridged to provide a much as 300 watts to each speaker. So even with the volume on the radio cranked, there’s more than enough power to ensure that every word and music note will be crystal clear.

The icing on the cake for this upgrade was a Rockford Fosgate DSR1 digital signal processor. This compact and processor allows us to fine-tune the speakers’ output to deliver smooth frequency response that offers impressive realism. Why a DSP? All the best audio systems in clubs, stadiums and high-end car audio installations use them to get the best sound possible. On Harleys, they are a fundamental part of our upgrade packages, and they deal with the unpleasant equalization built into the factory Boom! Box radio.

Northern Florida’s Motorcycle Audio Upgrade Experts

With the installation complete, the client returned to pick up his motorcycle and check out the work. He was amazed at how good the audio system sounded. A few of his friends came by for similar sound system packages after hearing this one. If you’re looking for a fantastic audio system upgrade for your motorcycle, come speak with one of our Product Specialists. We usually have a few bikes around with upgraded stereo that you are welcome to audition. For more information, give us a call or send our team an e-mail using our website’s contact form.

April 19, 2021 By Ocala Car Audio

Product Spotlight: PowerBass XL Powersports Soundbars

If you’re looking for a great way to add music to your side-by-side, ATV, Jeep or boat, drop by Ocala Car Audio and ask our team about the PowerBass XL-Series Powersports Soundbars. These soundbars are available in three sizes, and all models include a built-in amplifier and Bluetooth audio streaming. All this means you’re ready to rock and roll with these powersports soundbars.

PowerBass XL-650

The XL-650 is a compact soundbar that’s perfect for applications where space is at a premium. This bar includes a pair of 3.5-inch marine-grade woofers, two 3-inch midrange speakers and a set of mylar-dome tweeters. A two-channel, 300-watt amplifier powers the bar. We can connect the bar to an existing radio, or you can stream music directly from your smartphone using Bluetooth 4.0. The weather-resistant buttons on the bar’s front panel allow for volume adjustment and track selection. This let you keep your phone safe and secure. We offer the XL-650 at $549.99.

PowerBass XL-850

If you want a soundbar that will play louder, then the XL-850 is an excellent choice, The length jumps from 21 inches (on the XL-650) to 27 inches, so there is room for another set of 3.5-inch woofers. The amplifier in the XL-850 is also upgraded to a 400-watt unit. Just like the XL650 and the big, bad XL1250, there are dedicated RCA inputs and outputs. Adding a subwoofer to the outputs is a great way to add impact and warmth to your audio system. Our price on the XL-850 is $649.99.

PowerBass XL-1250

When you need the most output and clarity, the XL-1250 soundbar is the cream of the crop. Equipped with six woofers and a potent 500-watt amplifier, this all-in-one speaker solution sounds amazing. The XL-1250 has the same Bluetooth and connectivity features as the XL-650 and XL-850 and has an overall length of 33.75 inches. Pricing on the PowerBass XL-1250 from Ocala Car Audio is $849.99.

Upgrade Your Outdoor Experience at Ocala Car Audio

If you’re looking for a great way to add music to your side-by-side or off-roader, drop by Ocala Car Audio and ask about the Powersports Soundbars solutions from PowerBass USA. If you can’t get to the store, give us a call or use our contact form to send our team an e-mail.

December 28, 2020 By Ocala Car Audio

Paint Protection Film Upgrade for Ocala Chevrolet Corvette

A local client recently brought his 2020 Chevrolet Corvette to Ocala Car Audio for a paint protection film installation. This Corvette is finished in the Elkhart Lake Blue paint. The client didn’t want stone chips or scuffs to take away from the vehicle’s look and value. After a quick inspection of the car and a discussion about which surfaces he wanted us to protect, we put together a quote to keep this Stingray looking amazing.

Corvette Paint Protection Film Maintains Value

The edges of the film are wrapped around the body panels for a smooth finish.

The paint was thoroughly cleaned before the film was applied.

Our technicians were careful to keep this new interior in pristine condition.

3M Scotchgard Paint Protection Film Pro is a layer of clear urethane that’s applied directly to the vehicle. The film is 0.008 inch thick and has a smooth, high-gloss finish. Once installed, it’s almost impossible to see. The urethane construction absorbs impacts from stones, gravel and rocks and helps to resist stains from road tar and bug splatter. The film also has hydrophobic properties that help make keeping the vehicle clean easier. Even more impressive, the film’s self-healing properties will absorb light scuffs when exposed to some heat. Heat isn’t a problem here in Florida.

Our team used our computer-controlled plotter to cut out film pieces to fit the hood, fenders, mirror backs, front bumper and headlights. We cleaned and prepped each panel before applying a slip agent that lets us position the film correctly. As a result of not cutting the film on the vehicle, there’s no risk of the paint getting nicked or scratched during the installation process. Once the film is positioned perfectly, we use a squeegee to remove the slip agent from between the film and paint to bond securely.

Ocala’s Paint Film and Window Tint Experts

Wrapping the front bump took some time to get the Corvette wrapped with the 3M paint film. We always start with any body panel with convex curves to ensure that the film remains adequately adhered. These are the most challenging panels to wrap, and we need them to look perfect.

Once the car was finished, the client returned to Ocala Car Audio. When the client picked up up the car, he was impressed with how perfectly each piece of the film fit, and he loved that it was invisible. We gave him the paperwork he needed to activate the 10-year warranty from 3M and reviewed how to take care of the vehicle to maintain its appearance. In all, he was thrilled with the project.

If you’d like to keep your car or truck looking like new and avoid the annoyance of touch-ups, drop by our store and speak with one of our Product Specialists. We’d be happy to provide a quote to apply paint protection film to your vehicle. For more information or to schedule a consultation, give us a call or send our team an e-mail using our contact form.

December 21, 2020 By Ocala Car Audio

Product Spotlight: Diamond Audio MP654 Full-Range Horn Speakers

When it comes to speaker upgrades for motorcycles, the Diamond Audio MP654 horn speakers from Ocala Car Audio are unmatched. These 6.5-inch speakers feature a low-mass woofer and a horn tweeter that delivers a mind-boggling 101 dB of output from only a single watt of power. That’s more than 10x as much as a conventional car audio speaker. If you want your music loud and clear, these are the best choice!

Diamond Audio MP654 Speakers

The MP654 speakers are based on a cast-aluminum basket that fits into most 6.5-inch speaker openings. The speakers use a low-mass woofer cone and single-winding voice coil to deliver extraordinary output from 110 Hz up to the 7 kHz crossover point with the horn tweeters. The horn tweeter features a 1-inch diaphragm at the rear of the speaker under a custom-tool aluminum heatsink. The tweeter’s output feeds through the center of the woofer then to the custom-tooled horn on the front of the speaker assembly. Think of them like a concert speaker in a tidy package that’s perfect for your motorcycle.

Diamond Audio includes external high-power crossovers to enable the tweeters to sound their best and handle all the power you can feed them. Speaking of power, the MP654 speakers are rated to work with amplifiers as powerful at 150 watts.

Weather-Resistant Design Makes the MP654 Perfect for Motorcycles

The team of audio system upgrade experts at Ocala Car Audio understands the need to ensure that your audio system components will perform reliably. The Diamond Audio MP654 speakers feature a cone design that is both UV-stable and water-resistant. If your bike sits outside all year or you happen to get caught in the rain, there’s no need to worry about damage.

Upgrade Your Sound at Ocala Car Audio

If you have to have the loudest audio system possible on your motorcycle or side-by-side, drop by Ocala Car Audio and audition the amazing Diamond Audio MP654 full-range horn speakers. You can reach our team by phone or e-mail using the contact page here on our website for more information or to schedule a personal consultation.