When it comes to great amplifiers that fit in small spaces, Ocala Car Audio is fond of the Kenwood KAC-M3004. This four-channel amplifier is rated to produce 50 watts of power per channel when connected to a four-ohm load. It features a compact 6-1/2 by 3-7/8-inch footprint that makes it ideal for motorcycles, ATVs, side-by-sides, marine and automotive applications. Let’s take a close look at the features of this great little amplifier.
Kenwood KAC-M3004 Specifications
As we mentioned, the KAC-M3004 is a 50 watt per channel amp. The amp produces 75 watts per channel when loaded to two ohms and can be configured as a two-channel amp that produces 150 watts per channel into a four-ohm load. The M3004 uses efficient Class D circuitry to maximize the power from the vehicle electrical system and extend playtime with the engine off.
Amplifier Layout and Controls
The KAC-M3004 has a terminal block on the right end-panel for power and ground connections. It features a Molex connector with the four pairs of speaker wires. Two sets of nickel-plated RCA input jacks are located on the opposite end of the amp. To the right of the jacks are input sensitivity controls that allow us to match this amplifier with source units that produce anywhere from 0.2 to 5 volts of output on the preamp. To the left of the jacks are two potentiometers that adjust the built-in high- and low-pass electronic crossovers.
Compact Amplifier Applications
One of our most popular application for the Kenwood KAC-M3004 is in the fairing of a motorcycle. When bridged to a pair of high-quality speakers, the 150 watts of power are a perfect solution to ensure your music is produced with clarity, even at high volume levels. Kenwood has constructed this amp for marine and outdoor applications. This includes a corrosion-resistant coating on the circuit board and protective covers for the controls to help keep dust out.
If you are in the market for a great amplifier that can fit in very small spaces, drop by Ocala Car Audio and ask about the KAC-M3004 from Kenwood. You can also reach us by e-mail using our contact form for more information about our Kenwood amplifiers.
The team members at Ocala Car Audio in downtown Ocala are experts in the design and installation of fishing boat audio systems. Every project is treated with the utmost of care in both the planning and installation stages to ensure that our clients will be satisfied with the performance of their marine audio system. Whether you need to replace a radio or a pair of speakers or want to create a concert on the water for you and your friends, we have a solution for you. Let’s look at how we can upgrade your fishing boat to add fun to a day on the lake or ocean.
Whether you have a tournament-style fishing boat, a 26-foot center console boat or need a music solution for your big fishing charter, we can design, install and configure an audio system that will ensure your music comes through loud and clear, even when the throttle is pinned. If you can’t bring your boat to us, our team would be happy to come to you.
When it comes to great sound on the water, Ocala Car Audio offers some of the best marine entertainment products available. We offer prestigious brands like JL Audio, Memphis Car Audio, Kenwood, Aquatic AV and MMatts Pro Audio. Each of these brands designs and builds solutions that can handle the harsh freshwater and even saltwater environments.
When it comes to 
What are convertible speakers? In the case of the C3-650, the 1-inch silk-dome tweeter can be installed in the center of the woofer to create a premium coaxial speaker design, or the tweeter can be mounted separately from the woofer to create a component set. If you are upgrading your car or truck, we typically mount the woofer in the door and the tweeter on the dash, in the sail panel at the top of the door or in the A-pillar to improve the height of the soundstage.
As we mentioned, we love the way C3-650 set sounds. Midrange and high-frequency information is smooth and detailed, and bass response is solid for a speaker of its size. Because the driver is efficient (90 dB of output when powered with 1 watt and measured at 1 meter), you don’t need a lot of power to produce a lot of sound. This is one of our favorite upgrades for motorcycles — an application where speaker efficiency is crucial.
We are very proud to announce that Ocala Car Audio has returned to South Pine Street in downtown Ocala. That’s right! After first opening at this location nine years ago, our team is back in the heart of our community with the same level of passion and dedication that has made our business one of the top mobile enhancement retailers in central Florida.
The Kenwood DRV-N520 dash camera from Ocala Car Audio offers a combination of features not found on any other digital video recording solution. The N520 combines a high-quality recording system with the option of integration with many new Kenwood multimedia receivers. Let’s take a close look at this revolutionary camera system.
The DRV-N520 includes a forward-facing Full HD 1920×1080 pixel video camera that captures images at 27 frames per second for crystal-clear video. The built-in High Dynamic Range (HDR) contrast adjustment technology helps to ensure that even subtle details are captured in the recording.
The Kenwood DRV-N520 is compatible with source units like the DDX9905S, DMX905S and the popular DDX9904s. The intelligent image processing built into the N520 provides Forward Collision and Departure Delay warnings right on the screen of your radio. You can even play back videos recorded by the camera without the need to remove the 8GB microSD memory card.
Motorcycle audio amplifiers from Ocala Car Audio are the key to enjoying your music at realistic volume levels. Factory-installed stereo systems are typically a balance of size and cost, designed to keep casual listeners content. For people who truly enjoy their music, factory audio systems rarely provide the accuracy, details and volume capabilities to impress. Our staff members aren’t just audio fanatics; we love motorcycles as well. Let’s look at how an amp can breathe new life into the sound system on your bike.
With a properly configured amplifier on your bike, you can turn the volume up without distortion. Your music will be clearer, louder and much more dynamic. Drums and bass guitars will have more impact. Vocals will be crisp and detailed. The difference is quite impressive!
If you wish you had eyes in the back of your head, drop by Ocala Car Audio and check out our backup camera solutions. Backup camera systems aren’t just a great idea: The National Highway Traffic Safety Administration wants all new vehicles to include a rear-facing camera system. Given the staggering number of accidents and injuries that happen every day, we have to agree. Let’s look into how we can upgrade your safety and the safety of those around your vehicle.
Backup camera solutions are relatively simple. We will install a weather-resistant camera on the back of your vehicle. The location is chosen to work in concert with the camera’s wide field of vision to help identify objects that are directly behind or even off to the side of the vehicle.
If you own a pickup truck, several of our product partners offer replacement tailgate handles that feature a built-in camera. Likewise, we have third brake light assemblies with integrated cameras for SUVs, vans and trucks. Finally, Jeep Wrangler owners can choose from several mounting options that locate a camera inside the spare tire on the rear door.
Did you know that Ocala Car Audio could enhance your vehicle with the same driver safety products found on high-end and luxury vehicles? We offer blind spot monitoring systems and backup camera solutions that are compatible with almost every car on the road. Let’s look at some of the amazing collision avoidance products we offer.
In the same way a camera system lets you see what’s behind your vehicle, our parking sensor systems provide an audible alert when you are approaching an object. The biggest benefit of a sensor-based system is that you don’t have to remember to look at it. These systems beep faster and faster as you get closer to an object, finally producing a constant tone when you are within about 12 inches. We can even add sensors to the front of your vehicle to let you know when you are getting close to a curb or wall.
Have you ever witnessed an accident and wished that you had been able to record the events leading up to it? Even worse, what if you were involved? We offer a wide selection of compact 
When it comes to driver safety products for RVs, tow trucks and commercial vehicles, Ocala Car Audio has a solution for your unique application. From intelligent forward collision warning systems to sensor and camera-based parking and blind spot monitoring systems, our team of product specialists can help you find a technology that makes your time on the road safer. Let’s look at some of our most popular safety and collision avoidance solutions.
A rear vision camera system is a perfect add-on to a large vehicle like a pickup truck, SUV or van. Our cameras are compact, yet provide a wide field of vision. Backup camera systems work automatically, displaying a clear image as soon as you put your vehicle’s transmission in reverse. We can integrate the camera image with many factory color screens. If you lack one, we can upgrade your vehicle with a new rearview mirror with an integrated LCD screen or add a secondary monitor for commercial applications.
Ocala Car Audio carries a wide variety of digital video recording systems. Often called a dashcam, these compact video recorders capture everything that happens in front and behind your vehicle. Kenwood’s DRV-N520 dash camera has been very popular thanks to its ability to integrate with many of their multimedia receivers for configuration, warnings and video file playback. The Momento series of dashcams from Firstech include front and rear high-resolution cameras, and an on-screen display for easy video file playback. BlackVue offers a wide variety of camera solutions, many of which include a built-in WiFi hotspot so you can link your smartphone to the camera via an app.
If you are looking for the ultimate 
The Voxx RVM-740 is a replacement rearview camera that includes a massive LCD screen behind the mirror. During normal operation, the mirror provides a clear image of what is behind your vehicle. As soon as you select reverse gear, the RVM-740 switches to the rear camera input. Obstacles out of your line of sight are displayed on the 1280-by-390 pixel display.
As important as the features and performance of the RVM-740 are, how the camera is integrated into your vehicle plays a significant role in the reliability of its day-to-day operation. Our team of expert installation technicians has installed thousands of backup camera solutions and replaced countless rearview mirrors. All of our wiring is secured and protected to ensure long-term reliability and trouble-free operation.